A tall solid fence must resist substantial wind and depends on soil conditions.
Project library / Structures
Board Privacy Fence
A six-foot timber privacy-fence section carried by three horizontal stringers between posts.

What makes this build.
A tall solid fence must resist substantial wind and depends on soil conditions.
The source describes repeatable eight-foot sections.
Points to resolve before building
- The archive is not a complete site-specific post/foundation design.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Layout tools
- Post-hole tools
- Saw
- Drill
- Level
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Illustrated section | 6 ft high × 8 ft long | Source p. 2 |
|---|
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Confirm the fence line
- Establish boundaries, services, access and current height/setback requirements before laying out posts.
Design post foundations
- Determine embedment, footing and wind resistance for the actual soil and exposure. The sheet supplies no universal foundation detail.
Lay out the stringers
- Set the three horizontal rails between the planned posts and coordinate joints with actual board widths.
Arrange the boards
- Dry-layout the vertical boards to obtain the intended screening and consistent edges. Choose spacing from the current lumber condition and design.
Plan finishing and inspection
- Specify compatible exterior fasteners and finish, and make the posts and rail joints accessible for inspection.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Fence.pdf
- Source length
- 4 pages
- Attribution
- Georgia-Pacific, Backyard Projects: Fence, copyright 2004.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.