Project library / Seating

Seating / Build companion

English Garden Bench

A white-oak garden bench with a gently curved seat, vertical back slats and broad arms.

Advanced5 stages12-page source
AI finished-project concept for English Garden Bench
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Laminated curved legs and intersecting mortises require staged assembly.

Laminated curved legs and intersecting mortises require staged assembly.

Cross dowels reinforce the heavily used arm joints.

Points to resolve before building

  • Check all load-bearing joints and fasteners before seating; inspect exterior glue lines and hardware periodically.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Bandsaw
  • Router
  • Drill and dowel jig
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Overall62 in wide × 24 in deep × 34 in highSource p. 2
Back slatsTwelve at ¾ × 1½ × 14½ inSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Laminate and shape the legs

Source pp. 3, 4

  1. Glue straight boards into thick blanks and cut the paired front and curved rear legs. Establish common reference faces before rounding edges. Check the rear-leg curves as a matched pair and keep their joint locations referenced to the same original flat faces.
Before moving onPairs match and glue lines are sound.
Stage 2 of 5

Fit the side frames

Source pp. 5, 6, 7

  1. Mortise for the side rails, cut their tenons and shape the seat-support curves. Glue the sides before routing the intersecting long-rail mortises. This order lets the later mortises pass through the assembled corner correctly; test the dry joint before making that irreversible cut.
Before moving onJoint order avoids unwanted tenon collisions.
Stage 3 of 5

Prepare the back and seat supports

Source pp. 7, 8

  1. Dry-assemble the main rails, fit twelve back slats and shape the internal supports to match the side seat curve. Distribute the back slats evenly in a dry layout and use the side profile to check each internal seat support.
Before moving onSeat support profiles align.
Stage 4 of 5

Assemble the bench

Source pp. 11, 12

  1. Dowel the back slats into their rails and glue the back square. Join it and the front rail between the side assemblies, adding the corner braces. Keep the back assembly flat during glue-up so the many dowelled slats do not pull its rails into a twist.
Before moving onBench is square and untwisted.
Stage 5 of 5

Fit arms and seat

Source pp. 9, 12

  1. Install cross dowels at the arm screw joints, then attach the arms, internal supports and five long seat slats. Ease contact edges and apply an appropriate exterior finish. Predrill the seat fasteners and check the slat gaps, arm bearing surfaces and all exposed edges before the final finish.
Before moving onArms are secure and all feet bear evenly.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Garden Bench 1.pdf
Source length
12 pages
Attribution
Jean Bartholome, Garden Bench article.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.