Project library / Seating

Seating / Build companion

Scalloped Garden Bench

A compact painted garden bench with a shaped crest, broad arms and scalloped aprons.

Intermediate5 stages5-page source
AI finished-project concept for Scalloped Garden Bench
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Shaped rear legs and seat-support curves require accurate paired layout.

Shaped rear legs and seat-support curves require accurate paired layout.

Wide arms and scalloped aprons distinguish this smaller bench.

Points to resolve before building

  • Verify fastener compatibility with the actual treatment and inspect structural joints before seating.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Jigsaw
  • Drill
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Back crest length49 inSource p. 2
Back-leg length36 inSource p. 2
Armrest length26 inSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Shape the matching parts

Source pp. 2, 3

  1. Lay out the angled rear legs, curved seat supports and scalloped aprons from the elevations. Cut paired parts to matching profiles. Preserve the sloping rear-leg geometry while keeping enough material around the bolt locations, and smooth the shaped seating edges.
Before moving onSide assemblies will mirror one another.
Stage 2 of 5

Bolt the side frames

Source p. 2

  1. Attach the curved seat supports to front and rear legs using the specified bolted arrangement. Dry-check both sides on a flat surface. Use washers and keep bolt heads and nuts clear of sitting surfaces; do not tighten so hard that the wood is crushed.
Before moving onLeg angles and seat curves match.
Stage 3 of 5

Connect the seat

Source pp. 2, 3

  1. Fit the front, rear and side aprons, then attach the seat slats with drainage clearance. Dry-space the entire slat row first, accounting for the different front/back lengths and the shape of the seat supports.
Before moving onFrame is square and slats supported.
Stage 4 of 5

Build the back

Source p. 2

  1. Rabbet the top and bottom back rails for the upright slats, then fit the assembled back to the rear legs. Keep the eight back slats evenly spaced and check the assembled rail unit seats correctly against both rear legs.
Before moving onBack slats are evenly spaced.
Stage 5 of 5

Fit broad arms

Source p. 2

  1. Notch and fit the armrests to the front legs, secure them at the rear and install the curved support brackets. Smooth all contact edges and finish for exterior use. The front notches and rear fasteners work together, so test the armrest fit before fixing the curved brackets underneath.
Before moving onArms and bolted joints are secure.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Garden Bench 2.pdf
Source length
5 pages
Attribution
Georgia-Pacific, Backyard Projects: Garden Bench, copyright 2004.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.