Stair geometry, support loads and rail requirements depend on the actual site.
Project library / Structures
Outdoor Stair Planner
A planning guide to straight timber outdoor stairs, based on a historical rise-and-run article.

What makes this build.
Stair geometry, support loads and rail requirements depend on the actual site.
The source is a general calculation article, not a complete site-specific plan.
Points to resolve before building
- Historical handrail heights and other prescriptive claims are not current approval. Structural and building-code review is unresolved.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Measuring and drawing tools
- Level
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
Use the original drawing.
The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Measure the actual route
- Measure from the upper finished landing to the intended lower landing location. Record the available run, door clearances, drainage and ground level across the whole stair width.
Resolve current geometry
- Determine permitted rise, tread depth, width, landings, guards and handrails with the local building authority or a qualified designer. Do not substitute the article’s historical rule-of-thumb dimensions for current requirements.
Design supports and connections
- Have the stringer size, quantity, remaining section, upper attachment and lower support designed for the actual loads. Include ground conditions and durable exterior connections.
Check the layout full-size
- Lay out one stringer on a template, accounting for tread thickness at the first and last risers. Check equal finished rises against the approved design before using that template to lay out structural lumber.
Plan inspection and completion
- Include secure temporary access, final rail installation and required inspections in the build sequence. Use the historical cutting illustrations only as background after the current design is settled.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Outside Stairs.pdf
- Source length
- 6 pages
- Attribution
- Historical National Retail Hardware Association outdoor-stair article; illustrations credited to Sunset Books.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.