Project library / Seating

Seating / Build companion

Wedged Cherry Bench

A simple cherry bench with broad shaped end supports and visible walnut wedges locking its through joints.

Intermediate5 stages1-page source
AI finished-project concept for Wedged Cherry Bench
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original reading guide based on the archived plan; not shop-tested. Confirm diagram dimensions against the private source before cutting.
Understand the project

What makes this build.

Exposed wedged through-tenons require careful hand fitting.

Exposed wedged through-tenons require careful hand fitting.

The stretcher has an arched lower edge.

Walnut wedges contrast with the cherry panels.

Points to resolve before building

  • A drawing-only source needs full-size joint interpretation; do not force wedges into an undersized slot.
  • No tested load rating is supplied.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Jigsaw or bandsaw
  • Drill
  • Chisels
  • Clamps
  • Plane

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Top¾ × 12 × 36 inchesSource p. 1
End blanks¾ × 11½ × 18¼ inches, including tenon trimming allowanceSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Read the joint drawing

Source p. 1

  1. Transfer the side, top and joint views to full-size layouts. Distinguish trimming allowances from final height before making the end supports. Identify which dimensions include tenon-trimming waste, and mark visible faces so the walnut wedges appear in the intended positions.
Before moving onEvery through-tenon and wedge location has been reconciled.
Stage 2 of 5

Prepare top and ends

Source p. 1

  1. Flatten the cherry panels and cut the shaped end feet and seat outline. Keep paired supports identical so the bench stands evenly. Smooth the foot cutouts with the two ends compared side by side, retaining enough wood at each foot for a sound bearing.
Before moving onBoth end profiles match and the top lies flat.
Stage 3 of 5

Fit the stretcher

Source p. 1

  1. Cut and test the stretcher’s through-tenons against the end-support mortises. Shape its lower curve only after preserving the joint reference edges. Use the actual stretcher tenons to scribe their mating mortises; fitting to the part avoids a separate measurement error at each end.
Before moving onThe stretcher seats tightly without spreading the ends.
Stage 4 of 5

Fit the seat joints

Source p. 1

  1. Cut the corresponding top mortises and end-support tenons, working from matching layout marks. Make sample walnut wedges before cutting their final notches. Check the seat overhang on both sides while the joints are dry, before the wedges make final assembly difficult to reverse.
Before moving onSeat and ends dry-assemble square.
Stage 5 of 5

Wedge and finish

Source p. 1

  1. Assemble the joints with controlled wedge pressure and trim only after the fit is confirmed. Smooth the seat and edges, then inspect for rocking or splits before seating use. Work around the assembly gradually, checking for splits and racking as each wedge seats rather than fully driving one corner first.
Before moving onAll joints are tight and the bench stands without movement.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Shaker Bench.pdf
Source length
1 pages
Attribution
Archived Shaker Bench single-sheet drawing; original author not established.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.