Raised-panel joinery and accurately aligned bed bolts require advanced skills.
Project library / Beds & nursery
Oak Panel Single Bed
An oak single bed with three raised panels at each end, turned acorn post tops and bolted side rails.

What makes this build.
Raised-panel joinery and accurately aligned bed bolts require advanced skills.
Each end has three solid-oak fielded panels.
Optional turned acorns cap the square posts.
Points to resolve before building
- Planning only: expressly a child’s bed, requiring current safety review.
- Source dimensions mix inches and millimeters; reconcile them in one working drawing.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router table with compatible large-bit setup
- Drill
- Chisels
- Clamps
- Lathe for optional finials
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Source mattress | 75 × 36 inches | Source p. 1 |
|---|---|---|
| Support battens | 38 × 19 millimeters in source | Source p. 2 |
| Source slats | 75 × 25 millimeters, with 25-millimeter gaps; verify mattress needs. | Source p. 3 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Review the intended child use
- Measure the actual mattress and have the design assessed for the child’s age, entrapment, fall risk and current applicable requirements. Do not treat a historical toddler-bed article as a current safety specification.
Plan the paneled ends
- Lay out handed posts and equal panel openings from the actual frame dimensions. Distinguish raw-stock sizes in the cutting list from finished parts.
Prepare the frame joinery
- Make sample rail-and-stile profiles and mortise-and-tenon joints with compatible guarded tooling. Fit the end frames dry before sizing the raised panels.
Fit floating panels and rails
- Shape the panels to their grooves with adequate seasonal clearance. Fit the long side-rail joints and hardware paths, preserving enough wood around each barrel-nut recess.
Resolve mattress support
- Install reviewed cleats and slats for the selected mattress and user loads. Verify every edge and gap before adding any optional decorative finials.
Finish and inspect
- Use a suitable fully cured finish and secure all hardware and decorative parts. Complete a child-use inspection before the bed is occupied.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Single Bed.pdf
- Source length
- 4 pages
- Attribution
- Peter Dunsmore, Child’s Bed article.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.