Project library / Structures

Structures / Design study

Housed Stair Joinery Model

A three-tread demonstration of traditional closed-string stair joinery using housed treads, risers and wedges.

Advanced5 stages6-page source
AI finished-project concept for Housed Stair Joinery Model
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Planning overview, not a shop-tested or construction-ready plan. Planning only; do not install the demonstration geometry as a usable staircase. The source’s rise/going formula contains apparent unit errors and is not current code guidance.
Understand the project

What makes this build.

Accurate housed joints and compound stair layout demand advanced work.

Accurate housed joints and compound stair layout demand advanced work.

The article demonstrates a small three-step model.

Wedges tighten both risers and treads within closed strings.

Points to resolve before building

  • Planning only; do not install the demonstration geometry as a usable staircase.
  • The source’s rise/going formula contains apparent unit errors and is not current code guidance.
  • Do not reproduce the improvised ceiling-supported assembly clamp.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router with guide bush and templates
  • Square
  • Clamps
  • Chisels

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Demonstration geometry180-millimeter rise and 197-millimeter going; model only, not an approved stair.Source p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Separate model from building work

Source p. 1

  1. Decide whether this is a joinery model or a real stair project. A real stair requires current local design, handrail, guard, landing and structural review; the source model is deliberately not compliant.
Before moving onThe intended use and professional design responsibility are clear.
Stage 2 of 5

Make layout templates

Source p. 2

  1. For the model, prepare an accurate pitch board and margin guide. Mark paired strings from the same reference and account for the router guide-bush offset.
Before moving onBoth strings carry the same tread positions.
Stage 3 of 5

Cut sample housings

Source p. 2

  1. Test the tread, riser and wedge housing geometry on spare stock. Refine the template before routing the model strings.
Before moving onA sample joint closes firmly without excessive wedge force.
Stage 4 of 5

Prepare tread-riser pairs

Source p. 3

  1. Shape the nosings and fit the tongue-and-groove joints. Dry-assemble and number every part before adding glue blocks.
Before moving onEach pair remains square and fits its matching housings.
Stage 5 of 5

Assemble in a proper fixture

Source pp. 4, 5, 6

  1. Use a stable purpose-built clamping arrangement, keeping both strings parallel. Seat the model’s riser and tread wedges gradually while repeatedly checking square.
Before moving onThe model is square and demonstrates the intended joinery.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Staircase.pdf
Source length
6 pages
Attribution
Barrie Scott, Staircase article.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.