Project library / Seating

Seating / Build companion

Three Step Oak Stool

A traditional three-tread oak stool with stepped slab sides, arched feet and dovetailed cross rails.

Intermediate5 stages2-page source
AI finished-project concept for Three Step Oak Stool
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original reading guide based on the archived plan; not shop-tested. Confirm diagram dimensions against the private source before cutting.
Understand the project

What makes this build.

Hand-fitted half-dovetails resist spreading and racking.

Hand-fitted half-dovetails resist spreading and racking.

Three wide treads sit between stepped side panels.

Arched side cutouts form the feet.

Points to resolve before building

  • The scan’s small dimension drawing must be read separately; no full cut list is transcribed here.
  • No tested load rating is supplied; a stool is not a substitute for a rated ladder.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Jigsaw
  • Backsaw
  • Chisels
  • Plane
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Use the original drawing.

The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Lay out the stepped sides

Source p. 1

  1. Arrange panel boards so their widths create the tread setbacks. Mark matching side profiles and the arched foot openings from the private drawing. Number the side-board positions before glue-up so the natural board widths create the planned tread setbacks instead of a reversed stair.
Before moving onBoth side layouts match before glue-up.
Stage 2 of 5

Glue and shape the panels

Source p. 1

  1. Join the side boards with alignment dowels or biscuits, then flatten the faces. Cut and smooth the arched openings after the panels cure. Inspect the grain around the arch after cutting; reject a side that develops a split across a narrow foot section.
Before moving onSides are flat and the feet have sound grain around the arches.
Stage 3 of 5

Fit the dovetailed rails

Source pp. 1, 2

  1. Cut the rail tails and scribe each mating socket directly from its rail. Pare carefully until the shoulders close without spreading the sides. Keep each rail paired with its own socket, since hand-fitted dovetails may be individually accurate without being fully interchangeable.
Before moving onAll five rails dry-fit square.
Stage 4 of 5

Assemble the rigid frame

Source p. 2

  1. Predrill and counterbore the rail fasteners, assembling the mid-back and second-tread rails first. Add the remaining rails and check the frame for racking. Plug the rail screws after the frame has been checked for square, leaving the treads off until the frame itself is rigid.
Before moving onThe frame stands evenly and stays square.
Stage 5 of 5

Fit and inspect the treads

Source p. 2

  1. Round the front and end edges, attach the treads and plug the recessed screws. Apply a suitable non-slippery finish and inspect every joint before use. Use a flat support surface to check that all feet contact together, and correct a loose joint rather than hiding movement with finish.
Before moving onTreads are secure, level and free of sharp or raised fasteners.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Step Stool 1.pdf
Source length
2 pages
Attribution
Popular Mechanics, Classics Sketchbook by Thomas Klenck.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.