Project library / Seating

Seating / Design study

Two Step Panel Stool

A compact two-step stool with shaped slab ends and concealed rectangular support frames beneath both treads.

Intermediate5 stages6-page source
AI finished-project concept for Two Step Panel Stool
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Planning overview, not a shop-tested or construction-ready plan. Planning until the conflicting width is reconciled. The source mentions youngsters; child use needs an age-appropriate stability and access assessment.
Understand the project

What makes this build.

Glued end panels and rabbeted support frames require careful alignment.

Glued end panels and rabbeted support frames require careful alignment.

Both tread fasteners are concealed below the steps.

The detailed drawings contain a width different from the cover description.

Points to resolve before building

  • Planning until the conflicting width is reconciled.
  • The source mentions youngsters; child use needs an age-appropriate stability and access assessment.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Jigsaw
  • Drill
  • Clamps
  • Optional router
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Cover dimensions14½ inches high × 17 inches wide × 14 inches deep; width conflicts with tread drawing.Source p. 1
Treads in drawingsTwo at 7¼ × 18 inches from nominal 1×8 stockSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Resolve the overall width

Source pp. 1, 2, 3

  1. Compare the cover dimensions with the eighteen-inch treads in the detailed drawings. Make one consistent personal layout before cutting.
Before moving onOverall width and tread overhang have been reconciled.
Stage 2 of 5

Make the two side panels

Source pp. 2, 3

  1. Glue the short and tall sections into stepped end blanks, using the illustrated alignment joinery. Transfer the arched bottom cutout and create matching left/right panels.
Before moving onBoth sides match and stand on the same reference plane.
Stage 3 of 5

Prepare the support frames

Source p. 4

  1. Fit the rabbeted corners of the two rectangular frames. Predrill their assembly and mounting holes before gluing them square.
Before moving onFrame diagonals agree and screws will not collide.
Stage 4 of 5

Join frames to sides

Source p. 5

  1. Align each frame with the corresponding tread level and mark pilot holes through the frame. Fasten the frames without splitting the narrow side sections.
Before moving onThe stool body is rigid and both tread supports are level.
Stage 5 of 5

Fit treads and finish

Source pp. 3, 5

  1. Round the exposed tread edges and center the treads over the frames. Attach from below, ease corners and verify stability with appropriate review before stepping use.
Before moving onNo rocking, loose tread or projecting screw remains.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Step Stool 2.pdf
Source length
6 pages
Attribution
FurniturePlans.com, Step Stool, © 2001.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.