Raised cutout letters are an alternative to the pierced sunburst plaque also discussed in the source.
Project library / Boxes & small projects
Raised-Letter Address Plaque
A wood house sign combines individually fretted letters with a beveled backing board.

What makes this build.
Fretting thin individual letters without breaking narrow strokes, then aligning them on the backing, is the main challenge.
The letter layout is customizable; the source example is not a required house name.
Points to resolve before building
- Protect thin strokes while cutting and sanding.
- Select a current exterior adhesive/finish rather than relying on the historical product wording.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Scroll saw or coping saw
- Drill
- Square and ruler
- Tracing paper
- Sanding tools
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Letter stock thickness | ¼ in | Source p. 6 |
|---|---|---|
| Example letter height | 1½ in | Source p. 6 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Design a readable message
- Work out the text, spacing, and baseline on paper before selecting a board size. Keep narrow bridges and sharp internal corners out of the letter shapes. A paper layout also lets you decide the backing margins before using valuable thin stock, especially around the first and last characters.
Transfer the shapes
- Trace each letter onto the thin stock with the grain running across the letter forms as described. Mark the waste and keep a clean master drawing separate from the shop copy. Mark each loose piece on its reverse so similar letters return to the correct position when the layout is transferred.
Fret the letters
- Drill entry holes only for enclosed counters, then saw each letter on the waste side of its outline. Support delicate sections and change a dull or wandering blade. Clean the enclosed counters before separating fragile letters from their surrounding waste, where the larger board still offers useful support.
Prepare the backing
- Cut the backing to suit the complete message and bevel or ease its edges. Mark the baseline and spacing with a square, then arrange all letters without glue. Check the complete word spacing again after sanding, because softened edges can change the apparent gaps between letters.
Bond and mount
- Glue the letters with a suitable adhesive without flooding the edges. Finish the whole sign for its exposure and mount with suitable corrosion-resistant fixings, allowing drainage and drying behind it. Provide clearance behind an exterior plaque for drainage and use pilot holes so the wall fasteners do not split its corners.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Address Plaque.pdf
- Source length
- 8 pages
- Attribution
- Collection copyright 2004 Martian Auctions; original authorship unverified.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.