Project library / Garden & outdoor

Garden & outdoor / Build companion

Clear-Sided Seed Feeder

A pitched-roof feeder dispenses seed through a gap below clear sloping hopper panels.

Intermediate5 stages2-page source
AI finished-project concept for Clear-Sided Seed Feeder
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

Matching tapered hopper ends and maintaining the seed-flow opening are the critical construction details.

Clear sloping sides show the remaining seed.

A one-inch bottom opening meters seed onto the tray.

Hinged roof access simplifies refilling.

Points to resolve before building

  • The historical feeding advice is not current wildlife guidance.
  • Do not use wire mesh bags or unsuitable food recommendations from the old text without current wildlife advice.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Drill
  • Square
  • Sanding tools

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Seed-flow gap1 in below the hopper panelsSource p. 1
Clear panel height6½ inSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Lay out the hopper ends

Source p. 2

  1. Transfer the tapered end profile and plan the parts on the board before cutting. Keep the two ends identical so both clear panels fit the same angle. Lay out the roof and tray parts at the same time to avoid consuming the long board sections needed for their overhangs.
Before moving onEnd profiles match when stacked.
Stage 2 of 5

Prepare the tray

Source p. 2

  1. Fit the floor, edge pieces and mounting base from the drawing. Drill drainage holes and smooth the feeding edges. Locate the drainage holes where accumulated seed debris can be brushed out rather than hidden behind permanently fixed trim.
Before moving onWater can drain from the tray.
Stage 3 of 5

Fit removable clear walls

Source pp. 1, 2

  1. Cut grooves or use removable fasteners for the hopper panels. Position their upper edges at the roof so the specified lower seed-flow gap remains. A removable panel is preferable to a permanently sealed hopper when cleaning is considered, as the source itself notes.
Before moving onPanels fit securely and can be removed for cleaning.
Stage 4 of 5

Hinge the roof

Source p. 2

  1. Fit the two roof slopes and hinge the refill section as drawn. Check the overhang and clearance for opening without pulling the hopper apart. Check the refill opening with the feeder in its intended mounting position, including hand clearance around the roof.
Before moving onThe roof closes over the seed chamber and opens for filling.
Stage 5 of 5

Mount and maintain

Source pp. 1, 2

  1. Select a secure post or hanging system and keep cleaning access clear. Follow current local wildlife guidance for feeding and hygiene rather than the source’s dated food suggestions. Keep a practical route for removing damp seed and clearing blocked drains, because both affect the feeder’s operation.
Before moving onThe feeder is stable and all seed-contact surfaces are accessible.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Bird Feeder.pdf
Source length
2 pages
Attribution
James D. Wilson; drawing by Steve Gum; Missouri Department of Conservation.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.