Project library / Workshop

Workshop / Build companion

Angled Router-Bit Shelf

A sloping drilled shelf presents router bits and other shanked accessories against a wall backboard.

Beginner5 stages2-page source
AI finished-project concept for Angled Router-Bit Shelf
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The organizer is simple, but accurate shank-hole sizing and spacing keep sharp cutters separated and accessible.

Sloped presentation improves visibility of bit sizes.

Hole spacing can be customized to large cutters.

The rear mounting board remains vertical.

Points to resolve before building

  • Sharp exposed cutters need a protected shop location.
  • No wall load rating is supplied; select fixings for the actual tools and substrate.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Drill or drill press
  • Router for optional roundover
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Front-edge roundover⅜ inSource p. 1
Backboard thickness¾ inSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Inventory the accessories

Source p. 1

  1. Group the actual bit shanks and large cutters before setting the shelf length. Lay out spacing so cutting edges cannot touch neighboring tools. Include the widest cutting heads in the layout, not just the shank diameters, so neighboring bits do not overlap.
Before moving onEvery stored accessory has a marked location.
Stage 2 of 5

Prepare the angled shelf

Source p. 1

  1. Cut the sloped shelf and backboard to the drawing arrangement. Keep the mating bevel straight and supported during machining. Mark the wall-facing edge clearly before beveling so the shelf slopes in the intended direction after attachment.
Before moving onShelf and back meet without a rocking gap.
Stage 3 of 5

Drill the storage pattern

Source p. 1

  1. Drill holes to suit the actual shanks and use a depth stop. Test a representative bit before drilling the full grid. Use a test hole in the same stock and include any finish thickness before committing the full grid.
Before moving onBits insert freely without their cutters contacting the wood.
Stage 4 of 5

Ease and assemble

Source p. 1

  1. Round the exposed edges while leaving the rear mating edges intact. Predrill and screw the shelf to the backboard. Clamp the back and shelf together while drilling pilots to keep the bevel joint from sliding under screw pressure.
Before moving onThe assembly is rigid and screw tips remain buried.
Stage 5 of 5

Mount and load

Source p. 1

  1. Apply a clear finish and secure the backboard to suitable wall structure. Load the accessories only after checking the mounting. Keep frequently used bits within comfortable reach and leave room to remove each one without brushing adjacent cutting edges.
Before moving onSharp cutters are visible, separated and out of casual reach.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Bit Shelf.pdf
Source length
2 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.