Project library / Storage & cabinets

Storage & cabinets / Build companion

Arched Maple Bookcase

A five-foot plywood bookcase has adjustable shelves and a solid-wood face frame with a shallow arched header.

Intermediate5 stages7-page source
AI finished-project concept for Arched Maple Bookcase
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The doweled face frame, shallow arch and aligned shelf-pin rows demand accurate repeated layout rather than complex joinery.

Shallow arched header softens a plain open case.

Three shelves are adjustable.

The face-frame stiles form shaped feet.

Points to resolve before building

  • Keep the source patterns for the feet and molding profile.
  • Anchor the tall case before loading it with books.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Drill with shelf-pin jig
  • Jigsaw
  • Doweling jig
  • Clamps
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Stated overall size60 in tall × 34 in wide × 14 in deepSource p. 1
Adjustable shelvesThree at ¾ × 11¼ × 32½ inSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Cut and mark the plywood

Source pp. 1, 2

  1. Prepare the two sides, back, top, bottom and adjustable shelves from the cutting layout. Keep the actual plywood thickness consistent. Use the sheet layout to keep the veneer direction consistent on the two sides and the visible shelf faces.
Before moving onThe case parts match the cutting schedule.
Stage 2 of 5

Drill the shelf supports

Source p. 5

  1. Transfer the hole pattern to both side panels using one guide. Test the pins before completing the rows. Drill only as deeply as the chosen pins need, leaving intact veneer on the outside of each side panel.
Before moving onMatching holes hold a trial shelf level.
Stage 3 of 5

Assemble the case

Source p. 5

  1. Join the sides to the back, then fit top and bottom with glue and the specified nails. Compare diagonals before the adhesive sets. Fit the back squarely against the sides before attaching the top; it helps establish the entire cabinet rectangle.
Before moving onThe case is square and the bottom is at its planned height.
Stage 4 of 5

Shape and join the face frame

Source pp. 6, 7

  1. Cut the foot profiles and shallow top arch from the patterns. Dowel the rails between the stiles and fit the completed frame to the case. Transfer the curved header pattern to the actual cut length so its highest point remains at the center.
Before moving onThe frame is square and the arch is centered.
Stage 5 of 5

Fit molding and shelves

Source p. 7

  1. Miter and attach the top trim, then add solid edging to the adjustable shelves. Finish, fit the shelves on their pins and anchor the bookcase against tipping. Fit the narrow shelf edging flush with both faces and remove any glue squeeze-out before it interferes with the support pins.
Before moving onShelves sit on all pins and doors are not part of this design.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Bookcase 1.pdf
Source length
7 pages
Attribution
U-Build, Inc., Plan No. 907, copyright 2003; Ryobi-sponsored sheet.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.