Project library / Storage & cabinets

Storage & cabinets / Build companion

Iris Wall Cabinet

A low poplar wall cabinet combines open book shelves with a narrow door decorated by an applied iris.

Intermediate5 stages3-page source
AI finished-project concept for Iris Wall Cabinet
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The framed panel door and thin iris appliqué require accurate small-part fitting, while the wall-mounted case needs suitable structural attachment.

One narrow door balances two wide open shelves.

Thin applied flower pieces create the iris motif.

The illustrated color treatment is muted green with a contrasting flower.

Points to resolve before building

  • The back and wall fixing must support the loaded cabinet; the source does not supply a rated mounting system.
  • Thin iris parts need support during fret cutting.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Scroll saw or coping saw
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Side panels¾ × 8 × 18 inSource p. 3
Top and bottom¾ × 8 × 37½ inSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Assemble the low case

Source pp. 2, 3

  1. Cut the sides, top, bottom, shelf and divider from the schedule. Use biscuits or dowels to align the parts, keeping shelf and divider flush to the front. Dry-fit the shelf and divider together with the outer case so the narrow door bay does not change width during clamping.
Before moving onOpen bays and door bay are square.
Stage 2 of 5

Make the panel door

Source p. 2

  1. Groove the rails and stiles and fit the rail tenons into those grooves. Rabbet the panel edges to fit, allowing solid-panel movement rather than trapping it with glue. Keep the panel’s rear rabbet oriented toward the back, and avoid glue where it would prevent seasonal movement of a solid panel.
Before moving onThe door frame closes without forcing the panel.
Stage 3 of 5

Fit the back

Source p. 2

  1. Rabbet the case rear and fit either the movement-allowed solid back or the specified plywood alternative. Reconcile shelf depth with the chosen back thickness. The source changes the internal shelf and divider depth when using a thinner plywood back, so choose the back construction first.
Before moving onThe back seats properly and supports the mounting design.
Stage 4 of 5

Hang the door

Source p. 2

  1. Mortise and fit the hinges before finishing. Check even margins and unobstructed access to the open shelves. Mark hinge recesses from the actual hardware and verify the door swing before the colored finish makes corrections difficult.
Before moving onThe door closes flush and swings freely.
Stage 5 of 5

Apply the iris and finish

Source p. 2

  1. Cut the thin iris components, color them separately and attach after the case color is established. Finish and mount with hardware suited to the loaded cabinet and wall. Color the separate flower parts before attachment, preserving clean contact areas for the selected adhesive.
Before moving onThe appliqué is secure and the cabinet is firmly supported.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Brydcliffe Cabinet.pdf
Source length
3 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.