Project library / Garden & outdoor

Garden & outdoor / Build companion

Iris Bungalow Mailbox

A narrow Arts and Crafts wall mailbox has a sloped lid, pierced back crest and applied flower.

Intermediate5 stages3-page source
AI finished-project concept for Iris Bungalow Mailbox
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The sloping lid, floating bottom and delicate applied flower need careful fitting, plus appropriate wall and postal-use decisions.

Four pierced squares decorate the arched back crest.

An applied stylized flower dominates the front.

Copper hooks carry rolled magazines underneath.

Points to resolve before building

  • Postal acceptance and placement are not established by this historical plan.
  • The small bottom drainage gaps must remain open after finishing.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Scroll saw
  • Drill
  • Chisels
  • Files
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Back⅜ × 6 × 13 inSource p. 3
Lid⅜ × 5 × 7¾ inSource p. 3
Side top slope25°Source p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Fit the floating bottom

Source pp. 2, 3

  1. Cut the bottom tongues and matching front and back grooves. Keep the side gaps described so water can escape and the bottom can move. The bottom tongues engage only the front and back, while the side gaps provide a path for incidental water to escape.
Before moving onThe bottom fits freely without being glued to the sides.
Stage 2 of 5

Shape the case and lid

Source p. 3

  1. Cut the sloping side tops and matching rear lid bevel. Chamfer the other three lid edges using a supported setup that lets waste fall clear. The lid’s rear bevel differs from its three decorative underside chamfers, so label each edge before machining.
Before moving onThe lid bears evenly on the case.
Stage 3 of 5

Pierce the back crest

Source p. 3

  1. Mark the four-square motif and rounded crest. Drill waste and pare the small squares with controlled chisel cuts before refining the arch. Work from both faces when cleaning the pierced squares to reduce breakout at the visible front edges.
Before moving onSquares are crisp without split bridges.
Stage 4 of 5

Assemble and decorate

Source p. 3

  1. Glue the long-grain case joints, retaining the floating bottom. Cut and color the thin flower components, then attach them to the finished front. The front is slightly set back from the sides, while the back aligns with their rear edges; preserve this distinction during glue-up.
Before moving onThe flower is aligned and the case remains square.
Stage 5 of 5

Fit hardware and mount

Source p. 3

  1. Install the lid hinge and shaped copper magazine hooks. Mount securely and confirm suitability with the mail carrier before using this decorative design for deliveries. Deburr the copper hooks and verify their attachment before inserting a rolled newspaper that could pull on the lower backboard.
Before moving onThe lid opens freely and the wall fixings carry the loaded box.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Bungalow Mailbox.pdf
Source length
3 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.