Project library / Storage & cabinets

Storage & cabinets / Build companion

Cabriole-Leg Vanity

A furniture-style bathroom vanity combines curved front legs, two panel doors and a low drawer.

Intermediate6 stages4-page source
AI finished-project concept for Cabriole-Leg Vanity
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

Matching cabriole front legs and fitting a low drawer around sink plumbing require accurate templates and hardware-specific clearances.

Cabriole front legs contrast with straight rear legs.

A low drawer sits beneath the pair of doors.

Paneled fronts and white knobs give a furniture appearance.

Points to resolve before building

  • Sink dimensions govern the cabinet; historical plumbing clearances are not universal.
  • The leg template and final installation details require the source drawing and current fixture instructions.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Bandsaw
  • Router
  • Biscuit joiner
  • Pocket-hole jig
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Source sink top19 × 31 inSource p. 3
Source leg height36 inSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 6

Fit the design to the sink

Source p. 2

  1. Acquire or measure the intended sink top before setting cabinet dimensions. Map the trap, supply lines and drawer clearance with the plumbing installer. The source deliberately uses a taller cabinet than some older vanities, so choose the working height rather than copying it automatically.
Before moving onThe sink and plumbing fit the cabinet drawing.
Stage 2 of 6

Shape the front legs

Source p. 2

  1. Make a durable cabriole profile template and cut matching curved legs with supported bandsaw operations. Keep the rear legs straight as specified. Refine both front legs together where possible, preserving the flat areas needed for side-frame and face-frame attachment.
Before moving onThe front curves match and the mounting faces remain square.
Stage 3 of 6

Make the panel frames

Source p. 2

  1. Join side, face, door and drawer-face frames with the indicated biscuits. Route the rear rabbets after assembly and fit panels with suitable movement allowance. The panels are retained from behind, which allows their face appearance to be finished cleanly before final installation.
Before moving onFrames are flat and panels are retained without cross-grain restraint.
Stage 4 of 6

Assemble around the legs

Source p. 2

  1. Use the planned pocket-screw connections to join frames, legs and back crossmembers. Check that the cabinet is square before measuring the drawer opening. Check the rear support members against the wall and plumbing locations so installation screws do not conflict with services.
Before moving onThe cabinet stands evenly and the sink seat is planar.
Stage 5 of 6

Fit drawer and doors

Source pp. 2, 3

  1. Build the drawer to the chosen slides’ actual clearance. Fit the paneled fronts and porcelain-style knobs with even gaps. Temporary screws from inside the drawer permit the decorative front to be removed for finishing after its alignment is established.
Before moving onDoors and drawer clear the plumbing and each other.
Stage 6 of 6

Finish and install

Source p. 2

  1. Coat surfaces for bathroom exposure, secure the cabinet to wall structure and bed the sink as its manufacturer requires. Have plumbing connections completed and leak-checked appropriately. Keep the plumbing accessible for inspection and allow the fixture sealant to cure as specified before exposing the joint to water.
Before moving onThe sink is supported, cabinet anchored and all joints dry.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Cabinet Bathroom.pdf
Source length
4 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.