Project library / Boxes & small projects

Boxes & small projects / Design study

Sculpted Three-Stand Display

Three laminated wooden stands of different heights share a beveled base and flowing double-curved profiles.

Advanced5 stages2-page source
AI finished-project concept for Sculpted Three-Stand Display
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. The file describes the compound cutting method but omits a usable complete dimensioned pattern. Develop and check that pattern before cutting; this concept uses flameless candles. This guide has not been shop-tested.
Understand the project

What makes this build.

Each stand needs a compound bandsaw profile cut in two directions, and the surviving file lacks the full dimensioned pattern.

Three heights share one rectangular base.

Two-direction bandsaw cuts create sculpted waists.

Laminated blanks use ordinary board stock.

Points to resolve before building

  • No full dimensioned stand pattern is recovered in this file.
  • Wooden candle platforms are not fireproof; the walkthrough selects flameless candles.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Bandsaw
  • Drill
  • Clamps
  • Sanding tools

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Stand mounting holes⅜ in diameter × ¾ in deepSource p. 2
Base edge bevelAbout 15° inward toward the topSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Allocate the board

Source p. 2

  1. Reserve the base and divide the remaining stock for the three laminated blanks. Follow the source sequence so each stand receives its intended thickness. The tallest stand uses more laminations than the small one, so do not divide the remaining stock into three identical stacks.
Before moving onAll three blank stacks and the base are accounted for.
Stage 2 of 5

Laminate and square the blanks

Source p. 2

  1. Glue the stand layers with full contact and let them cure. Square the blanks and drill centered underside mounting holes before shaping. Drilling the mounting holes while the blanks are square gives a more reliable perpendicular reference than drilling after the sculpted form is cut.
Before moving onBlanks are sound and sit square on their ends.
Stage 3 of 5

Transfer both profiles

Source p. 2

  1. Prepare full-size patterns from the supplied concept and mark two adjacent blank faces. The surviving file does not provide a clear dimensioned pattern, so resolve proportions before cutting. Check the narrowest neck sections on both profiles and preserve enough material for the intended display load.
Before moving onBoth views meet cleanly at the corners.
Stage 4 of 5

Bandsaw the compound curves

Source p. 2

  1. Cut one profile, securely restore the waste as support, then rotate and cut the second profile. Sand the flowing surfaces without thinning the narrow necks excessively. The restored waste supports the second cut; secure it well enough that it cannot shift or trap the blade.
Before moving onThe stands remain symmetrical with broad stable bearing ends.
Stage 5 of 5

Join the base

Source p. 2

  1. Bevel the base edges, arrange the three stands and drill matching dowel holes. Glue the assembly and use flameless candles for the finished display. Arrange the three heights on the base before drilling, checking that their platforms do not crowd the selected flameless candles.
Before moving onThe base sits flat and each stand is securely fixed.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Candle Stands.pdf
Source length
2 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.