Three shallow shelves have raised back strips.
Project library / Storage & cabinets
Three-Tier Chairside Shelf
A compact open bookcase uses doweled end frames, small side rods and three bracket-supported shelves.

What makes this build.
Doweled end frames and twelve aligned shelf brackets require accurate repeated layout despite the small open form.
Small rods decorate and retain items at the open sides.
Metal brackets support the shelf corners.
Points to resolve before building
- The source gives no shelf-load capacity.
- Use screw lengths that do not emerge through the shelf faces.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Drill
- Doweling jig
- Clamps
- Sander
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Illustrated overall height | 32½ in | Source p. 3 |
|---|---|---|
| Shelf length | 25½ in | Source p. 3 |
| End-rail dowel holes | ⅜ in diameter × 1 1/16 in deep | Source p. 2 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Prepare the open end frames
- Cut the four stiles and repeated end rails from the diagram. Mark matching rail positions on both ends. Lay the paired end frames beside each other to transfer shelf levels from one shared baseline.
Transfer the dowel centers
- Drill the end-rail holes and transfer them with dowel centers or a jig. Keep the small side-rod holes distinct from the structural dowels. Check the dowel depth against the rail width before drilling; over-deep holes can break through or intersect another joint.
Glue the end assemblies
- Fit rails and rods between the stiles and clamp each end flat. Check the diagonals before leaving the joints to cure. Keep the rods aligned while clamping so they do not hold a rail away from its stile shoulder.
Fit shelf brackets and backs
- Predrill the bracket screws and fasten the shelf backs to the stiles. Align the brackets so every shelf has four bearing points. The raised back strips help keep books in place, so align their lower edges with the corresponding shelf surfaces.
Install and finish the shelves
- Screw the shelves to their brackets, sand and finish. Check stability beside the intended chair and restrain the unit if its position or loading requires it. Keep heavier books on the lower levels and confirm that any lamp cord cannot pull the small case over.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Chairside Bookcase.pdf
- Source length
- 3 pages
- Attribution
- Collection copyright 2004 Martian Auctions; original authorship unverified.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.