Six web frames separate the graduated drawer openings.
Project library / Storage & cabinets
Tall Pine Drawer Chest
A narrow pine chest uses housed web frames, graduated dovetailed drawers and a shaped plinth.

What makes this build.
Six housed web frames and individually fitted dovetailed drawers require repeated precise joinery and careful drawer tuning.
Half-blind front dovetails conceal the joint ends.
The plinth front has a shallow decorative cutout.
Points to resolve before building
- The supplied text lacks a complete dimensioned cut list.
- Tall clothing storage needs appropriate current stability and anti-tip provisions; anchoring is essential.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Router with supported jigs
- Chisels
- Saw
- Drill
- Plane
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Frame housings | ¼ in / 6 mm deep | Source p. 2 |
|---|---|---|
| Drawer side thickness | ½ in / 12 mm | Source p. 4 |
| Back and drawer bottoms | ¼ in / 6 mm plywood | Source p. 6 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Make matching web frames
- Prepare the six internal frames and fit their mortise-and-tenon corners. Label each fitted joint, glue square and trim the front corner notches. Keep each rail-and-stile corner labeled after fitting, so the tuned tenons return to their matching mortises during glue-up.
House the case sides
- Acclimate the side panels and mark matching stopped housings. Route with a secured guide and cut the rear rebate for the plywood back. The stopped housings keep their ends hidden at the front; use a consistent guide offset and verify the first slot before repeating it.
Assemble case and plinth
- Glue the frames between the sides with assistance, checking diagonals. Fit the top and the shaped, doweled plinth while retaining suitable movement allowance in solid panels. Leave the back removable until the drawers fit, giving access to the runners and stops from behind.
Fit individual drawer fronts
- Plane each front to its own opening before making its drawer box. Keep the different drawer depths identified throughout the dovetail work. Number the fronts and their openings before planing, because the graduated heights make the drawers non-interchangeable.
Join the drawer boxes
- Cut through dovetails at the backs and half-blind dovetails at the fronts using a secure jig or hand tools. Capture the plywood bottoms in grooves without glue. Use the fitted pins to transfer the tails and support every piece securely, especially when routing narrow plywood ends.
Tune travel and secure the chest
- Fit knobs and stops, then install the back after tuning drawer travel. Finish and install a suitable anti-tip system before use. Fit the stops against correctly seated drawers so the fronts finish flush rather than disappearing into their openings.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Chest of Drawers 2.pdf
- Source length
- 6 pages
- Attribution
- Dave Mackenzie, tall chest-of-drawers article.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Current reference for design review: CPSC guidance for clothing storage units.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.