Project library / Boxes & small projects

Boxes & small projects / Build companion

Scrollwork Wall Mirror

A rectangular mirror sits in a raised molded frame over a pierced Chippendale-inspired wooden surround.

Intermediate5 stages4-page source
AI finished-project concept for Scrollwork Wall Mirror
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The thin fretted surround and accurately mitered raised frame require delicate shaping and careful mirror retention.

A broad fretted surround projects beyond the rectangular glass.

Raised molding separates mirror from scrollwork.

Rear cleats hold the background sections together.

Points to resolve before building

  • The source gives a style-inspired design, not an authenticated antique reproduction.
  • Full-size scroll pattern and glass-retention details must be confirmed before cutting.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Bandsaw or scroll saw
  • Router or molding plane
  • Miter saw
  • Drill
  • Sanding tools

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Use the original drawing.

The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Transfer the scroll outline

Source p. 2

  1. Use the source pattern to lay out the background pieces, keeping the narrow lobes supported by suitable grain. Cut outside the line and refine the paired curves. Keep the pattern available after sanding so opposite lobes can be compared without repeatedly tracing the finished piece.
Before moving onThe outline is balanced and thin tips are intact.
Stage 2 of 5

Join the background

Source p. 2

  1. Fit the butt joints and rear cleats as shown. Reconcile the cleat attachment with cross-grain movement rather than locking a broad solid surround rigidly. Plan the rear cleats and hanging points together, maintaining clearance for the mirror retainers and the wall surface.
Before moving onThe assembled surround is flat.
Stage 3 of 5

Measure the raised frame

Source p. 2

  1. Take molding lengths from the completed surround. Select a profile that leaves enough depth to retain the actual mirror and its backing. The molding profile is intentionally adaptable to available cutters, but its bearing and glass-retaining surfaces must remain functional.
Before moving onThe planned frame covers the opening evenly.
Stage 4 of 5

Fit the molding miters

Source p. 2

  1. Machine the profile on adequately supported stock or use matching purchased molding. Cut the four miters, dry-fit and screw the frame to its background. Clamp the frame temporarily on the surround to verify margins before drilling the screws from the back.
Before moving onMiters close and the glass seat lies in one plane.
Stage 5 of 5

Finish and install glass

Source p. 2

  1. Finish the wood before inserting the mirror, then fit retaining strips without loading the glass edges. Add hangers and wall fixings sized to the complete assembly. Check the complete hanging assembly with the mirror installed because its center of gravity differs from the empty wooden frame.
Before moving onThe mirror is retained securely and hangs flat.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Chippendale Mirror.pdf
Source length
4 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.