Project library / Boxes & small projects

Boxes & small projects / Build companion

Woodland Tree Ornaments

Flat wooden bear, dove, hobbyhorse and train silhouettes become simple ribbon-hung decorations.

Beginner4 stages2-page source
AI finished-project concept for Woodland Tree Ornaments
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. An original study guide based on the supplied historical plan; not shop-tested. Use the privately owned source drawings for full-size patterns and complete cutting details.
Understand the project

What makes this build.

The small silhouettes are simple, but narrow projections and safe support during sawing require care.

Flat silhouettes keep the natural wood visible.

Four different supplied motifs make a coordinated set.

Ribbon adds color without intricate painting.

Points to resolve before building

  • Small pieces require secure support around moving blades.
  • These ornaments are not tested toys; keep loose small parts and loops away from young children.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Bandsaw, scroll saw or jigsaw with suitable support
  • Files and sanding tools
  • Drill if adding a hanging hole

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Stock thickness½ inSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 4

Transfer the silhouettes

Source pp. 1, 2

  1. Make reusable templates from the supplied bear, dove, horse and train patterns. Arrange them on sound stock with narrow projections supported by the grain. Choose the orientation of each hanging loop while laying out the figure so the finished shape will not hang at an unintended angle.
Before moving onEvery outline is clear and avoids defects.
Stage 2 of 4

Saw with support

Source p. 1

  1. Cut outside each outline using a blade suited to the tightest curve. Keep small pieces attached to larger waste as long as possible and use a safe holding method. Use relief cuts in the waste around tight outside turns instead of twisting a blade through a curve it cannot follow.
Before moving onNo ears, tails or other narrow sections are broken.
Stage 3 of 4

Refine the edges

Source p. 1

  1. Smooth the perimeter and soften the front and back edges by hand. Check the narrow inside curves with a small file instead of forcing them against a large sander. A hand-sanding block gives better control near delicate ears and tails than a powered belt that can catch the small piece.
Before moving onThe shapes are comfortable to handle without splinters.
Stage 4 of 4

Finish and hang

Source p. 1

  1. Leave the wood natural or apply a suitable cured finish, then attach ribbon loops securely. Treat the small decorations and loops as ornaments rather than children’s toys. Check ribbon knots and attachment points before hanging the ornaments, especially if they will be packed and reused each year.
Before moving onThe loop holds and the ornament hangs in the intended orientation.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Christmas Ornaments.pdf
Source length
2 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.