Mortise-and-tenon corners require accurate fit and allowance for two rails at each leg.
Project library / Tables & desks
Turned-Leg Coffee Table
A compact pine coffee table with turned legs, mortise-and-tenon rails, and a solid top held by wooden buttons.

What makes this build.
Mortise-and-tenon corners require accurate fit and allowance for two rails at each leg.
Eight buttons retain the top without rigidly gluing it to the frame.
Points to resolve before building
- Several printed dimensions and sanding grits appear erroneous; resolve them before construction.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw and square
- Mortise gauge
- Mortiser or drill and chisels
- Router with straight cutter
- Clamps
- Lathe optional
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Leg stock | 450 × 60 × 60 mm | Source p. 1 |
|---|---|---|
| Rail stock | End: 250 × 50 × 30 mm; side: 600 × 50 × 30 mm | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Resolve the cutting list
- Compare the top-board entry against the photograph and frame footprint. The printed 460 × 55 mm top boards would not cover the listed frame, so establish a corrected top and joinery schedule before buying wood.
Prepare the legs and rails
- Cut matching pairs and mark their inside faces. Turn the leg profiles or use purchased turned legs, leaving square upper blocks for the joints.
Lay out and fit the joints
- Transfer the rail height around each upper leg block, then mark mortises and matching tenons from a common reference face. Cut a sample joint before committing to the adjoining mortises at each corner.
Assemble the base
- Dry-fit the two end frames and long rails, then glue the end frames first. Join the cured ends with the long rails while checking diagonal measurements and a flat stance.
Attach the top with buttons
- Rout the rail grooves and make properly sized wooden buttons to engage them. Fit eight buttons with clearance for seasonal movement; do not use the implausibly tiny printed button sizes without correction.
Finish the surfaces
- Sand using a sensible progressive abrasive sequence suited to the wood and finish. Follow the finish manufacturer’s compatibility and curing guidance; the printed grit sequence is unreliable.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Coffee Table 3.pdf
- Source length
- 6 pages
- Attribution
- Collection copyright 2004 Martian Auctions; original authorship unverified
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.