Project library / Tables & desks

Tables & desks / Build companion

Concord Tripod Table

A round candle stand supported by a turned column and three curved, dowelled feet.

Advanced5 stages4-page source
AI finished-project concept for Concord Tripod Table
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Turning, curved leg fitting and three-way dowel alignment must agree.

Turning, curved leg fitting and three-way dowel alignment must agree.

The top is carried by a separate underside brace.

Points to resolve before building

  • Support the spindle securely while boring; do not hand-hold a round blank near a drill bit.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Lathe
  • Bandsaw or jigsaw
  • Drill and boring cradle
  • Router
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Top¾ × 16-in diameterSource p. 2
Column blank2-in diameter × 21¼ inSource p. 2
Leg blanks¾ × 7¼ × 7½ inSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Prepare matching patterns

Source pp. 2, 3

  1. Transfer the leg and spindle profiles from the drawings to durable templates. Check the round top and brace layout before milling the hardwood. The leg template should preserve the same foot contact and column-contact geometry in all three copies.
Before moving onPatterns retain the source proportions.
Stage 2 of 5

Turn the column

Source p. 3

  1. Mark the spindle centers and turn the repeated beads and coves between centers. Preserve the attachment areas at the ends rather than shaping away their bearing surfaces. Use the actual template as the diameter and length reference, stopping the lathe before checking dimensions.
Before moving onColumn runs true and the mounting regions match the drawing.
Stage 3 of 5

Shape the three legs

Source p. 3

  1. Cut three matching profiles and smooth their curves. Round the exposed edges and form the concave inner faces to seat against the column. Keep one outer-curve offcut to use as a matching clamping caul when attaching the legs.
Before moving onEach leg meets the spindle without a rocking gap.
Stage 4 of 5

Fit the dowelled tripod

Source pp. 3, 4

  1. Mark three attachment positions equally around the spindle. Hold the round work in a secure boring cradle, transfer the dowel positions and dry-fit the legs before gluing with shaped cauls. Glue one leg at a time and check its foot orientation against the column before moving to the next.
Before moving onAll three feet touch a flat surface.
Stage 5 of 5

Fit the top and brace

Source p. 4

  1. Glue and flatten the top panel, cut its circle and form its edge profile. Fit the brace to the column and fasten the top with provision for seasonal movement. Retain the marked center underneath so the brace and spindle align with the center of the round panel.
Before moving onTop is centered, level and securely retained.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Concord Table.pdf
Source length
4 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.