Project library / Storage & cabinets

Storage & cabinets / Build companion

Painted Corner Cupboard

A painted pine corner cupboard with fluted stiles, glazed upper doors and a molded cornice.

Advanced6 stages12-page source
AI finished-project concept for Painted Corner Cupboard
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Angled framing, stopped flutes and multi-layer cornice work require advanced layout.

Angled framing, stopped flutes and multi-layer cornice work require advanced layout.

An open recess separates the upper glazed doors from the counter.

Points to resolve before building

  • Use cabinet-appropriate fasteners rather than assuming the archival drywall-screw specification suits every joint.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router and guided jigs
  • Biscuit joiner
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Upper back boardsTwelve at ¾ × 5½ × 50 inSource p. 3
Lower side height26 inSource p. 4
Upper side height50 inSource p. 4

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 6

Make the structural frames

Source pp. 5, 6

  1. Label the square and angled half-lap frame members before cutting. Rout the laps in controlled jigs, assemble the rear and horizontal frames, and verify their geometry.
Before moving onEach triangular frame is square at the rear corner.
Stage 2 of 6

Shape the sides and stiles

Source p. 6

  1. Cut the mating 22½-degree bevels and biscuit slots. Rout stopped flutes while the pieces are still accessible, then clamp the angled joints with supporting blocks.
Before moving onThe face stiles meet the sides without twisted seams.
Stage 3 of 6

Fit backs and shelves

Source pp. 7, 8

  1. Install the beaded tongue-and-groove upper back and plywood lower backs. Shape the triangular shelves, add their edge banding and plate grooves, and fasten them to the frame system.
Before moving onShelves sit level and the visible back boards align.
Stage 4 of 6

Build the base and cornice

Source pp. 9, 10

  1. Fit the mitered plinth facings and the layered crown molding to the actual case angles. Use scrap tests for compound cuts before cutting the finished lengths.
Before moving onMoldings wrap the front corners with closed joints.
Stage 5 of 6

Fit the four doors

Source pp. 11, 12

  1. Make half-lapped door frames, with glazing retention in the upper pair and plywood panels in the lower pair. Size the hinges and latch blocks to the finished openings.
Before moving onDoor gaps are consistent and glazing is safely retained.
Stage 6 of 6

Finish and install

Source pp. 11, 12

  1. Paint with glass removed and reassemble after curing. Connect the upper and lower cases and secure the cupboard against tipping at its final location.
Before moving onAll connectors and anti-tip attachments are installed.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Corner Cupboard.pdf
Source length
12 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.