Project library / Storage & cabinets

Storage & cabinets / Design study

Scalloped Corner Display

A traditional corner display cabinet with open shelves framed by scalloped sides above a closed cupboard.

Advanced5 stages4-page source
AI finished-project concept for Scalloped Corner Display
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Panel-thickness and fastener ambiguities need checking in the original drawings before this becomes a cutting guide. This guide has not been shop-tested.
Understand the project

What makes this build.

Matching scalloped sides and angled corner construction require careful templates.

Matching scalloped sides and angled corner construction require careful templates.

Open display shelves stand above a two-door base cupboard.

Points to resolve before building

  • The extracted panel thickness and fastener entries contain ambiguities; resolve them from the original diagram before construction.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Jigsaw or bandsaw
  • Router
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Use the original drawing.

The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Resolve panel thicknesses

Source pp. 2, 3

  1. Read the drawing alongside the text before ordering material. The stated plywood thickness and overlapping back widths need reconciliation, so create a checked panel schedule first.
Before moving onBack overlap and all shelf widths agree.
Stage 2 of 5

Shape the side panels

Source p. 2

  1. Transfer the scalloped side outline to both panels and cut them as a matched pair. Smooth the curves and apply edging where required before the cabinet is closed.
Before moving onBoth decorative profiles match.
Stage 3 of 5

Build the corner shell

Source pp. 2, 3

  1. Join the backs with their rabbet and reinforcing strip. Fit the horizontal panels and shelves, keeping the rear corner square and the diagonal front straight.
Before moving onShelves fit cleanly and the cabinet is not racked.
Stage 4 of 5

Add the decorative framing

Source p. 3

  1. Install cleats and beveled spacers, then fit the upper fringe, base skirt and applied molding. Trim each piece to the assembled cabinet rather than a nominal opening.
Before moving onTrim follows the actual case without gaps.
Stage 5 of 5

Fit the cupboard doors

Source pp. 3, 4

  1. Build the applied-panel doors and locate the handed knife hinges from their actual hardware. Add stops, finish accessible surfaces and anchor the tall cabinet before use.
Before moving onDoors swing freely and the installed cabinet is restrained.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Corner Display Cabinet.pdf
Source length
4 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.