Project library / Boxes & small projects

Boxes & small projects / Build companion

Fretwork Corner Shelf

A small mahogany corner shelf with delicate pierced side panels and a rounded-front base.

Intermediate5 stages2-page source
AI finished-project concept for Fretwork Corner Shelf
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Fine pierced cuts and fragile narrow bridges require careful sawing.

Fine pierced cuts and fragile narrow bridges require careful sawing.

Unequal side widths compensate for the overlap at the rear corner.

Points to resolve before building

  • The thin decorative panels are not a rated load-bearing wall bracket; establish suitable support before display.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Scroll saw or fret saw
  • Drill
  • Fine files
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Panel thickness¼ inSource p. 1
Side widths7¾ in and 8 in to allow their overlapSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Transfer the patterns

Source p. 2

  1. Copy the source’s two decorative side profiles and shelf outline at the verified scale. Keep the unequal side widths that account for the corner overlap. Confirm that the two pattern widths include the overlap rather than trimming both sides to the same width.
Before moving onPatterns preserve the quarter-inch overlap.
Stage 2 of 5

Cut the pierced details

Source pp. 1, 2

  1. Drill entry holes in the enclosed fretwork areas and cut the openings with a fine blade. Support the thin panel so fragile bridges do not break. Complete the internal openings before separating the outer silhouette, while the surrounding waste still supports the fragile piece.
Before moving onAll narrow decorative connections remain intact.
Stage 3 of 5

Shape the outer edges

Source p. 2

  1. Cut the outer silhouettes and rounded shelf front. Refine the curves with fine files and sand the edges without rounding away the detail. Compare the mirrored decorative areas as you refine them, avoiding aggressive sanding that can make the thin bridges unequal.
Before moving onThe two side silhouettes align at the corner.
Stage 4 of 5

Assemble the corner

Source p. 2

  1. Dry-fit the overlapping sides at a right angle, then fit the shelf to them. Glue and pin the joints with a clamping arrangement that protects the fretwork. Pilot the tiny pins where needed to avoid splitting the thin stock and check the shelf remains level within the corner.
Before moving onShelf sits level and both sides meet squarely.
Stage 5 of 5

Finish and display

Source p. 2

  1. Color exposed plywood edges if used, then apply a thin clear finish. Choose a secure support or mounting arrangement appropriate to the intended display position and load. Test the finish on an offcut first, especially if edge coloring is needed to blend plywood laminations with the face.
Before moving onThe shelf is stable before placing an ornament on it.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Corner Shelf.pdf
Source length
2 pages
Attribution
Woodworker’s Journal, Vol. 5 Issue 6, November–December 1981, project 16878 EZ.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.