Haunched door joinery, dovetailed drawers and figured maple require advanced fitting.
Project library / Storage & cabinets
Country Dry Sink
A curly-maple cupboard with two drawers, paneled doors and a raised splashback inspired by a dry sink.

What makes this build.
Haunched door joinery, dovetailed drawers and figured maple require advanced fitting.
Two drawers replace the basin opening of an older dry-sink form.
Points to resolve before building
- Resolve the contradictory face-frame tenon/mortise lengths before cutting. Cross-grain splashback connections need movement allowance.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router
- Drill
- Chisels
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Panel grooves | ⅜ × ⅜ in | Source p. 2 |
|---|---|---|
| Shelf dadoes | ¾ in wide × ¼ in deep | Source p. 2 |
| Back boards | ½-in poplar | Source p. 4 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Check the joint schedule
- Compare the face-frame mortise and tenon dimensions in the source; the printed lengths are inconsistent. Establish compatible joint depths before milling the maple.
Build the frame and doors
- Make the face-frame joints and fit the haunched door frames. Leave seasonal clearance around the floating door panels instead of gluing them rigidly into the grooves.
Assemble the case
- Glue up the sides and shelves, cut matched shelf dadoes and rear rabbets, and fit the case to the face frame. Shape the base cutouts after the front arrangement is established.
Fit the top and splashback
- Flatten the solid top and ease its edges. Cut the rounded splashback ends and curved side returns, fastening the cross-grain components with allowance for movement.
Install drawers and back
- Fit the dovetailed drawers, guides and stops to the actual openings. Add the beaded shiplap back with movement gaps, hang the doors and complete the finish.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Country Dry Sink.pdf
- Source length
- 4 pages
- Attribution
- Popular Woodworking dry-sink article reproduced in the supplied collection.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.