Project library / Storage & cabinets

Storage & cabinets / Design study

Vineyard Wall Cupboard

A shallow bird’s-eye maple wall cupboard with two paneled doors and a small ledged shelf below.

Advanced5 stages1-page source
AI finished-project concept for Vineyard Wall Cupboard
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Single-sheet measured design requires verified joinery, hardware and load-rated wall mounting before construction. This guide has not been shop-tested.
Understand the project

What makes this build.

Dovetailed casework and shaped door details must be developed from a single measured drawing rather than a full build sequence.

The source is one drawing sheet with dovetailed casework and shaped details.

A shallow open ledged shelf sits under the two doors.

Points to resolve before building

  • No complete assembly or mounting specification is supplied.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Chisels
  • Drill
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Top¾ × 10½ × 35¼ inSource p. 1
Side blanks¾ × 7 × 26⅝ inSource p. 1

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Read the measured drawing

Source p. 1

  1. Create a joint and hardware schedule from the single sheet before cutting. Keep the cupboard’s shallow depth and projecting top distinct.
Before moving onAll parts have a verified position.
Stage 2 of 5

Fit the carcass joints

Source p. 1

  1. Make the side-to-top dovetail detail and shelf housings shown in the section. Cut the shaped lower side ends from a paired template.
Before moving onShelves and sides dry-fit square.
Stage 3 of 5

Build the door frame

Source p. 1

  1. Join the stiles and rails around the center stile, then fit the two framed panels with movement allowance.
Before moving onDoors match the actual openings.
Stage 4 of 5

Add backs and molding

Source p. 1

  1. Fit the beaded boards and hanging strip, then the layered top molding and lower shelf ledge.
Before moving onBack joints and ledge are continuous.
Stage 5 of 5

Plan the installation

Source p. 1

  1. Fit hinges and pulls, finish the wood and design wall fixings for the loaded cupboard and actual wall construction.
Before moving onMounting load path is resolved before hanging.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Cupboard.pdf
Source length
1 pages
Attribution
Martha’s Vineyard Cupboard; authorship not visible on supplied sheet.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.