Project library / Boxes & small projects

Boxes & small projects / Build companion

Laminated Cutting Board

A simple rectangular edge-laminated board with a softly rounded working edge.

Beginner5 stages2-page source
AI finished-project concept for Laminated Cutting Board
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Straight mating edges and a flat glue-up are the main skills.

Straight mating edges and a flat glue-up are the main skills.

The source supplies a method rather than fixed finished dimensions.

Points to resolve before building

  • The archival resorcinol-glue and soaking advice is not carried forward as current food-contact guidance.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Clamps
  • Sander or hand plane
  • Router optional

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Use the original drawing.

The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Choose the stock

Source p. 1

  1. Reject cracked, contaminated or unidentified wood. Arrange the strips with grain running along the board and choose thickness from the strip widths. Use identified stock appropriate to repeated food contact and exclude painted, treated or contaminated workshop scraps from the selection.
Before moving onAll wood is suitable for the intended use.
Stage 2 of 5

Prepare straight edges

Source pp. 1, 2

  1. Cut the strips slightly longer than the finished board. Joint their mating edges and dry-clamp them to find gaps before glue-up. Number the dry-fitted strips so their arrangement and grain direction remain consistent when adhesive is applied to the mating faces.
Before moving onJoints close without excessive force.
Stage 3 of 5

Laminate the panel

Source p. 2

  1. Apply the selected adhesive according to its current instructions and clamp the strips flat with cauls. Observe its full cure time. Use an adhesive explicitly suitable for the intended cutting-board use; the archive’s waterproof-glue wording alone does not establish that suitability.
Before moving onNo gaps remain at glue lines.
Stage 4 of 5

Flatten and trim

Source p. 2

  1. Flatten both faces and trim the ends square. Ease the perimeter with a small roundover or hand tools while keeping a useful flat working face. Check the panel on a flat surface between sanding passes so a belt sander does not leave a rocking or hollow working face.
Before moving onBoard rests flat without sharp corners.
Stage 5 of 5

Finish for its use

Source p. 2

  1. Apply a finish specified for cutting boards and follow its cure/maintenance directions. Wash without soaking and dry both faces after use. Inspect the glue lines and edges during cleaning, and stop using the board for food preparation if splits trap debris.
Before moving onFinish and adhesive are ready for their intended contact.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Cutting Board 1.pdf
Source length
2 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.