Project library / Boxes & small projects

Boxes & small projects / Build companion

Tile Cheese Board

A small wooden serving board with a circular tile insert and a matching nested wire cutter.

Intermediate5 stages2-page source
AI finished-project concept for Tile Cheese Board
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

A fine kerf preserves the mating cutter and holder shapes.

A fine kerf preserves the mating cutter and holder shapes.

The round tile is set into an elongated rounded wooden base.

Points to resolve before building

  • Do not assume a decorative tile or musical-instrument string is food-safe; verify materials before serving food.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Scroll saw
  • Drill
  • Sander
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Wood blanksTwo at 5/16 × 7 × 11 inSource p. 2
Tile6-in diameter × ⅜ inSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Fit the design to the tile

Source p. 2

  1. Measure the actual circular tile and transfer the base and upper outlines. Keep one blank intact for the base. The two thin blanks must match in thickness and outline, and the actual tile determines the upper opening size.
Before moving onTile clearance is deliberate.
Stage 2 of 5

Cut the nested parts

Source p. 2

  1. Cut the tile opening, cutter handle and retaining pieces from the upper blank with a fine blade to minimize kerf loss. Support the waste as each cut finishes, because the pieces removed from the handle become the matching supports.
Before moving onHandle nests between its matching holders.
Stage 3 of 5

Glue the supports

Source p. 2

  1. Glue the tile surround and cutter holders to the base. Use the handle only as a spacing gauge and remove it before adhesive can catch it. Dry-fit the entire nested arrangement first and leave enough clearance for the handle to lift out after finishing.
Before moving onHandle remains removable.
Stage 4 of 5

Prepare the cutter

Source p. 2

  1. Smooth the curved handle and drill its wire-anchor holes diagonally as illustrated. Select a food-appropriate wire system and avoid overstressing the thin wooden ends. Test the anchor arrangement with modest tension before final assembly; a cracked tip is a reason to replace the handle.
Before moving onAnchors hold without splitting the handle.
Stage 5 of 5

Finish and assemble

Source p. 2

  1. Finish with a product appropriate to the intended use, fit nonslip feet and seat the tile. Verify the glaze and insert are suitable for food service. Keep the tile removable where appropriate for cleaning and check that no wire anchor or sharp end is exposed to the hand.
Before moving onBoard is stable and cutter stores securely.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Cutting Board 2.pdf
Source length
2 pages
Attribution
Collection copyright 2004 Martian Auctions; original authorship unverified
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.