An undercut sliding lid and relief-carved handle require controlled fine work.
Project library / Boxes & small projects
Carved Desk Set
A layered wooden pen case with a sliding lid, a shallow tray and a matching carved letter opener.

What makes this build.
An undercut sliding lid and relief-carved handle require controlled fine work.
The tray, pen case and wooden letter opener share a decorative motif.
Points to resolve before building
- The source understates scroll-saw injury risk; use the machine’s current guarding and handling instructions.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Scroll saw with tilting table
- Drill and Forstner bit
- Carving knife or V-tool
- Small plane
- Gouge
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Cavity drilling bit | 1⅝-in diameter | Source p. 3 |
|---|
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Prepare the layered box
- Label the lid, middle and base pieces. Drill and saw the elongated cavity through the middle layer, then smooth it before assembly. Preserve enough material around the cavity for the sliding-lid frame, and remove rough fibers from its interior before access becomes restricted.
Fit the sliding lid
- Transfer the lid outline and use the specified tilted cut to form its undercut mating edge. Refine the lid and frame together before gluing. Test the sliding action over the full travel and keep track of the matching orientation before separating the pieces for glue-up.
Assemble the case and tray
- Glue the base, hollow middle and lid frame without trapping squeeze-out in the slide. Mount the case to the tray base and carve the shallow pen recess. Remove glue from the slide immediately and check the tray recess is shallow and smooth enough to retrieve a pen easily.
Shape the letter opener
- Cut the profile, plane the blade taper and model the handle with controlled stop-cuts. A clay practice model can clarify the relief before cutting wood. Keep the wooden blade edge blunt enough for handling; this is a letter opener, not a sharpened cutting knife.
Carve matching decoration
- Transfer the centered angel motif to lid and handle, then incise or model it with shallow controlled cuts. Smooth and finish while keeping finish out of the lid clearance. Practice the motif on scrap first, then compare the finished lid and handle so the decoration reads as one coordinated set.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Desk Set.pdf
- Source length
- 8 pages
- Attribution
- Collection copyright 2004 Martian Auctions; original authorship unverified
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.