A machine-mounted safety aid requires machine-specific compatibility review.
Project library / Workshop
Adjustable Featherboard
A hardwood featherboard and angled holder drawn for a Ryobi-style table-saw mounting system.

What makes this build.
A machine-mounted safety aid requires machine-specific compatibility review.
The source labels this drawing for discussion rather than certified use.
Points to resolve before building
- This is not a substitute for the saw guard, riving knife or proper feed technique.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Drill
- Router
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Featherboard blank | ⅜ × 2⅛ × 8½ in | Source p. 1 |
|---|---|---|
| Holder blank | ¾ × 2 × 5 in | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Check machine compatibility
- Identify the actual saw’s attachment system and compare it with the Ryobi-style nut and locating pin shown.
Lay out the holder
- Transfer the angled dado, slot and locating-pin holes from the drawing. Verify clearances on a non-running machine.
Prepare the feather strip
- Select straight-grained sound hardwood and mark the fine parallel fingers. Use a controlled fixture for the short cuts.
Assemble the adjustment
- Fit the bolt, washer and nut so the strip slides and locks securely. Check that no fastener can enter the cutting path.
Review its operating position
- Consult the actual saw manual for permitted featherboard use and positioning. Do not place a side-pressure device where it can pinch a separated offcut into the blade.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Feather Board.pdf
- Source length
- 1 pages
- Attribution
- DJM, Feather Board and Holder, December 1999.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.