Small hardware mortises and a close-fitting tray need careful work.
Project library / Boxes & small projects
Maple Jewelry Chest
A small lockable maple jewelry box with a molded base and lift-out divided tray.

What makes this build.
Small hardware mortises and a close-fitting tray need careful work.
The tray can be divided to suit the collection.
Points to resolve before building
- Review wood movement in the solid bottom/tray before rigidly gluing across the grain.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router or hand joinery tools
- Drill
- Chisels
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Overall | 13 in wide × 10 in deep × 5 in high | Source p. 1 |
|---|
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Fit the lock first
- Lay out the case parts and locate the chosen lock while the panels are separate. Check lid thickness and hinge clearances. Use the actual lock body and key position for the recess, preserving enough surrounding wood for its fixing screws.
Assemble the case
- Fit the corner and bottom details from the drawing and clamp the box square. Allow for movement if using the source’s solid bottom. Test the bottom and corners together before applying glue, and compare diagonals so the tray opening remains rectangular.
Make the removable tray
- Build the thin tray sides and bottom, fit the divider and size the support strips to the completed box. Test the tray at both ends of the case so it lifts out easily without binding against a slightly tight corner.
Fit the molding and lid
- Miter the four base molding pieces and fit them to the actual case. Hinge the lid and adjust the lock engagement. Check the closed lid aligns with the case before drilling hardware pilots, and keep screw tips below the finished outer face.
Finish the interior
- Sand all compartments, apply a compatible cured finish and add optional lining after the finish is dry. Fit any lining and extra dividers after confirming the tray’s remaining clearance, since fabric and adhesive reduce the usable space.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Jewellary box.pdf
- Source length
- 2 pages
- Attribution
- U-Bild, Jewelry Box plan 906, copyright 2000.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.