Profiled doors and a coordinated face-frame carcass require accurate cabinet work.
Project library / Storage & cabinets
Paneled Kitchen Wall Cabinet
A shallow face-frame wall cabinet with two profiled wooden doors and adjustable shelves.

What makes this build.
Profiled doors and a coordinated face-frame carcass require accurate cabinet work.
The source contains only two drawing sheets.
Points to resolve before building
- The sheet does not provide a complete material, assembly or wall-load specification.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router or shaper
- Pocket-hole jig
- Drill
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Case side height shown | 34½ in | Source p. 2 |
|---|---|---|
| Case depth shown | 10 in | Source p. 2 |
| Door finished width | 12 in each | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Reconcile the two sheets
- Map door, face-frame and carcass dimensions onto one checked drawing. Verify the unusually thin back label and the difference between side heights rather than assuming the OCR is a complete list.
Prepare the case joints
- Lay out the lower shelf dadoes and rear rabbets from the actual material thicknesses. Add shelf support holes before assembling the case.
Assemble the case and face
- Build the carcass square and join the face frame with the pocket-screw arrangement. Fit the back and structural screw strip without relying on the thin back to carry hanging loads.
Fit the panel doors
- Use matched rail/stile profiles and leave movement clearance around solid panels. Fit the selected hinges to the actual overlay and adjust the door gaps.
Design the wall fixing
- Specify anchors into suitable wall structure for the fully loaded cabinet. Finish and hang only after the hanging-strip connections and wall load path are checked.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Kitchen Cabinets.pdf
- Source length
- 2 pages
- Attribution
- Sylvan Tool Works / The American Woodshop, Kitchen Cabinets, copyright 2002.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.