Project library / Storage & cabinets

Storage & cabinets / Build companion

Side-Shelf Mirror Cabinet

A shallow maple medicine cabinet with a mirrored door and alternating short and long side shelves.

Advanced5 stages6-page source
AI finished-project concept for Side-Shelf Mirror Cabinet
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original guide to an archival plan; not shop-tested. Check the source drawings and actual material sizes before cutting.
Understand the project

What makes this build.

Splined miters and mortised cantilever shelves require precise small joinery.

Splined miters and mortised cantilever shelves require precise small joinery.

The side shelves alternate short and long projections.

Points to resolve before building

  • Do not rely on the thin back alone for hanging loads. Use supported safe saw jigs instead of trapping stock between fence and miter gauge.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Drill
  • Chisels
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Case15½ in wide × 21½ in high × 4 in deepSource pp. 2, 3
Mirror⅛ × 14½ × 20½ inSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Prepare matching case and door pieces

Source p. 3

  1. Mill the carcass parts oversize and reserve the narrow strips for the matching door frame. Mark their order so grain and miter locations remain coordinated. Keep the thin reserved strips supported during further cutting, as they are intended to preserve the visual match with the case.
Before moving onCase and door parts stay paired.
Stage 2 of 5

Cut the joints and shelf holes

Source pp. 3, 4

  1. Make spline-reinforced case miters with a secure dedicated jig. Drill shelf-pin rows and chop the side-shelf mortises while the sides can lie flat. Dry-fit the splines and shelf joints separately before assembly so corrections can be made while every contact surface remains accessible.
Before moving onOpposite shelf rows and mortises align.
Stage 3 of 5

Fit the projecting shelves

Source p. 4

  1. Cut their tenons to the actual mortises and add the toothbrush holes to the short lower-right shelf if desired. Dry-fit all four shelves to confirm the alternating lengths and orientation. Check that the toothbrush holes and shelf edges do not weaken the tenon area or interfere with the door’s swing.
Before moving onEach shelf shoulder seats cleanly.
Stage 4 of 5

Assemble the case and mirror door

Source pp. 4, 5

  1. Glue the carcass square, fit the back and then attach the exterior shelves. Reinforce the separate door miters, form its finger pull and rabbet for the mirror/backing stack. Measure the glazing stack from actual parts and keep the door flat during glue-up so the mirror will not be forced.
Before moving onDoor fits the case and frame corners are sound.
Stage 5 of 5

Glaze, hang and mount

Source pp. 5, 6

  1. Finish before inserting the mirror, then retain it gently with the backing and molding. Fit hinges/catches and use a verified mounting system into suitable wall structure for the complete loaded cabinet. Fit the glass shelves on their supports and test the loaded door clearance after the cabinet has been leveled on the wall.
Before moving onGlass is unforced and the cabinet is securely mounted.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Medicine Cabinet.pdf
Source length
6 pages
Attribution
Woodworker’s Journal, Vol. 8 Issue 1, January–February 1984, project 11060EZ.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.