The main skill is a flat, accurately fitted hand-chiseled recess.
Project library / Boxes & small projects
Sharpening Stone Box
A simple pine holder and lift-off cover fitted by hand to an existing rectangular oilstone.

What makes this build.
The main skill is a flat, accurately fitted hand-chiseled recess.
The solid lift-off lid has no hinges or latch.
Points to resolve before building
- Avoid clamping or wedging the brittle stone itself. This simple wooden cover is not a sealed oil container.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Marking gauge
- Square
- Chisels
- Hand plane
- Bench vise
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
Use the original drawing.
The source does not provide a complete, confidently readable set of dimensions here. Confirm the original drawing and develop a measured parts list before cutting.
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Fit the blanks to the stone
- Set the actual stone on the pine and leave the end margins described by the source. Cut matching base and cover blanks, checking that the stone and enough surrounding wood fit without relying on nominal timber size.
Mark the base recess
- Center the stone and mark its outline with a square and gauge. Set the recess depth to leave roughly half the stone standing above the holder, adjusting for the actual stone thickness.
Chisel the holder
- Work carefully inside the outline in shallow stages and level the recess bottom. Test-fit repeatedly so the brittle stone seats with support and can be removed without levering against a tight wooden edge.
Fit the lift-off cover
- Transfer the stone position to the second blank and mark the lid recess. Chisel enough clearance for the exposed stone so the lid closes on the wooden base rather than pressing on the abrasive surface.
Ease edges and check use
- Plane the outer cover edges to a modest chamfer and remove splinters. Clamp only the wooden holder in the bench vise, then confirm the stone is stable and can still be lifted out for cleaning.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Oil Stone Box.pdf
- Source length
- 2 pages
- Attribution
- Collection copyright 2004 Martian Auctions; original authorship unverified
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.