Project library / Garden & outdoor

Garden & outdoor / Build companion

Slatted Cedar & Ipe Planter

A square planter with dark ipe slats, contrasting cedar corner legs and bands, and a removable plastic tub.

Intermediate5 stages5-page source
AI finished-project concept for Slatted Cedar & Ipe Planter
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original reading guide based on the archived plan; not shop-tested. Confirm diagram dimensions against the private source before cutting.
Understand the project

What makes this build.

Dense ipe slats, splined cedar corners and a mitered cap require careful machining and fitting.

Splined corner legs conceal slat overlaps.

The planting tub separates soil from the outer wood.

Optional benches are a separate support design.

Points to resolve before building

  • Dense ipe needs suitable tooling, dust control and pilot holes.
  • Optional bench support requires its own stability and attachment check.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Drill/driver
  • Clamps

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Overall21¾ in high × 22¼ in squareSource p. 2
Tub18 × 18 × 14 inSource p. 4

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Fit the inner frames

Source p. 2

  1. Build two square pressure-treated frames around the actual tub. Add the floorboards to the lower frame and check the tub support before cladding. The inner frame dimensions follow the plastic tub, so check the real container rather than relying on its advertised nominal size.
Before moving onThe tub fits without squeezing the frame.
Stage 2 of 5

Install the dark slats

Source p. 2

  1. Prefinish the ipe if desired. Center the first slat on each face, then work outward with ⅛-inch spacers and trim the corner overlaps. Predrill the dense ipe and keep the visible fastener pattern consistent; forcing screws can split slats or break screw heads.
Before moving onSpacing is regular on all four sides.
Stage 3 of 5

Make paired corner legs

Source p. 3

  1. Cut the wide and narrow leg pieces, groove them for cedar splines, and glue each right-angle pair. Ease their exposed edges before staining. Dry-fit the splined L-shaped corners around the assembled box before glue-up, checking that their outer faces meet cleanly.
Before moving onEach corner pair has a consistent outside profile.
Stage 4 of 5

Band the box

Source p. 3

  1. Attach the legs with their tops aligned to the slats. Measure the band pieces between the installed legs and fasten through to the inner frame. Work from the same height marks on all legs so the cedar bands continue level around the dark slatted body.
Before moving onBanding fits the actual assembled box.
Stage 5 of 5

Miter the cap

Source p. 4

  1. Fit the cap a piece at a time around the top. Finish its underside before fastening, then insert the tub and preserve drainage and airflow. Leave the plastic tub removable for cleaning and drainage inspection, and confirm that the cap does not pinch its rim.
Before moving onCap corners meet and the tub remains removable.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Planter.pdf
Source length
5 pages
Attribution
Workbench / PlansNOW, August Home Publishing Co., “A Versatile Planter.”
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.