Half-lapped bolted frames carry a long shallow tray.
Project library / Garden & outdoor
Gravel Tray Plant Stand
A wide outdoor display stand combines a gravel-filled tray, upper shelf, and lattice backdrop.

What makes this build.
Matched half-lapped frames and a fitted metal tray require accurate layout and wet-load planning.
Lattice provides a plant backdrop behind an upper shelf.
Points to resolve before building
- Wet gravel and pots create substantial weight; no rated capacity is supplied.
- Check compatibility of aluminum with the selected treated timber and isolate if required.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Chisel
- Drill/driver
- Square
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Tray length | 1700 mm | Source p. 1 |
|---|---|---|
| Rear legs | 1200 mm | Source p. 1 |
| Front legs | 500 mm | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Let’s make it.
Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.
Fit the tray first
- Confirm the fabricated tray size and its compatibility with treated timber. Adjust the supporting frame to the actual tray before cutting long members. Check the tray’s actual folded dimensions before making the timber frame; a metal tray that binds is difficult to adjust later.
Build three end frames
- Cut matching half-laps in legs and rails and refine them until their faces are flush. Drill the bolted connections while each frame is clamped. Use one full-size end-frame layout for all three assemblies so the long rails can meet them without creating a twist.
Connect the long rails
- Join the outer frames with the back rails, then center the third frame between them. Keep the lower rails aligned and the full stand square. Clamp the frames upright on a flat surface and compare diagonals before fixing the long rails and locking the spacing.
Support tray and shelf
- Install the tray-support slats and raised front retaining slat. Shape the three small shelf brackets from the source grid and add the upper shelf boards. Allow for the weight of gravel and watered plants when reviewing support, especially at the middle frame and tray edges.
Attach lattice and test support
- Fix the lattice with the stand square. Assess the combined tray, water, gravel and pot load before filling; ensure the site is level and stable. Keep the metal tray isolated from incompatible treated timber and leave the lattice easy to inspect behind the plants.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Planters Work Bench.pdf
- Source length
- 1 pages
- Attribution
- Archived woodworking-plan collection; original author not established from this source.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.