Project library / Boxes & small projects

Boxes & small projects / Build companion

Carved Address Plaque

A pine address plaque with raised natural-wood numerals and border against a routed, painted background.

Intermediate6 stages4-page source
AI finished-project concept for Carved Address Plaque
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original reading guide based on the archived plan; not shop-tested. Confirm diagram dimensions against the private source before cutting.
Understand the project

What makes this build.

Freehand routing around small characters requires controlled support and patient cleanup.

Freehand routing around small characters requires controlled support and patient cleanup.

The numbers and border are parts of the original board, not glued-on pieces.

The source illustrates a dark background with lighter raised lettering.

Points to resolve before building

  • The old household-bleach finishing suggestion is optional and omitted; select a compatible modern finishing system.
  • Adapt the sign to the actual address rather than copying the photographed number.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Router with straight and cove bits
  • Saw
  • Drill with Forstner bit
  • Chisel
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Example finished plaque6 × 14 inchesSource p. 1
Example numerals3½ inches highSource p. 1
Recessed background¼ inch deep in the source exampleSource p. 3

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 6

Compose the address

Source p. 1

  1. Print or draw large, uncomplicated numerals and arrange them on the board. Set the border and overall size from the actual address before cutting. View the paper pattern from the normal approach distance before committing to a font; thin interior details can disappear visually.
Before moving onThe full address is readable with balanced margins.
Stage 2 of 6

Shape the plaque

Source p. 2

  1. Mark the outside rectangle and form the decorative inset corners with the source’s drilled-hole method. Cut the outline and mark a clear inner border. Use a backing board beneath the corner holes to reduce breakout, and retain enough stock around each shaped corner for mounting.
Before moving onThe shaped plaque is symmetrical and has enough border width.
Stage 3 of 6

Apply the pattern

Source pp. 2, 3

  1. Rout the perimeter cove while the work is securely held, then attach the number patterns along a shared baseline. Keep the router base fully supported. Make the number outlines dark and continuous so sawdust or a shifted paper edge cannot obscure the intended boundary.
Before moving onPatterns adhere firmly and the routing field is clearly defined.
Stage 4 of 6

Recess the background

Source p. 3

  1. Remove waste in controlled passes around the numbers, following the router and bit makers’ guidance. Change to a smaller bit or use a chisel for tight details instead of overcutting a numeral. Clear the broad open areas first, leaving delicate edges for the smaller cutter and chisel cleanup when the main waste is gone.
Before moving onNumbers and border remain intact above an even field.
Stage 5 of 6

Create the color contrast

Source pp. 3, 4

  1. Sand loose fibers and apply compatible dark paint. After curing, sand the raised numerals and border back to clean wood without rounding away their definition. Use a flat sanding block on the raised surfaces so the dark field stays recessed and the numerals retain crisp edges.
Before moving onThe address reads clearly against the dark recess.
Stage 6 of 6

Protect and mount

Source p. 4

  1. Apply an exterior finish compatible with the paint and wood. Predrill a mounting arrangement suited to the actual wall and keep water from collecting behind the plaque. Test the finish schedule on scrap with the same paint and wood before coating the plaque, especially at the exposed numeral edges.
Before moving onFinish is cured and the plaque is securely visible from the approach.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Routed Address Sign.pdf
Source length
4 pages
Attribution
Workbench article Routed Address Sign; finishing technique credited in source to Clifford Hicks.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.