An incomplete single-sheet motorized-tool plan needs advanced mechanical review.
Project library / Workshop
Hinged Router Top & Fence
A birch-plywood router top with a hinged Workmate mounting board and an adjustable split fence incorporating a dust chute.

What makes this build.
An incomplete single-sheet motorized-tool plan needs advanced mechanical review.
The fence includes ribs and a shaped central dust chute.
The top is intended for a separate folding work support, not a cabinet base.
Points to resolve before building
- Planning only: one drawing and a cut list do not provide complete safe assembly instructions.
- The thin acrylic insert detail and switched power strip require current manufacturer and electrical review.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router
- Drill
- Clamps
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Top panel layers | Each 23 × 35 × ¾ inches | Source p. 1 |
|---|---|---|
| Fence bottom | ½ × 8 × 41 inches | Source p. 1 |
| Dust chute port | 3-inch hole in rear panel | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Reconstruct the missing assembly
- Use the one-page parts list and fence drawing to lay out the Workmate attachment, hinges and prop. Obtain or develop the missing overall assembly details before cutting.
Review the router installation
- Choose a manufacturer-compatible mounting arrangement, guarding and switch provision. Do not assume the listed thin acrylic component is suitable as a load-bearing router plate.
Plan the laminated top
- Match the birch-plywood layers and solid edging, leaving the required opening and router clearance. Check the top against the actual support and hinge positions.
Make the split fence
- Lay out the Baltic birch base, sub-fronts, end ribs and slotted adjustable hardwood faces. Establish a flat, square reference face before assembly.
Fit dust collection and support
- Assemble the central chute and verify hose clearance throughout hinge movement. Review the prop and bench-clamping arrangement with the complete unpowered machine.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Router Table.pdf
- Source length
- 1 pages
- Attribution
- Archived Router Table and Fence single-sheet drawing; original author not established.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.