Project library / Workshop

Workshop / Design study

Drawer Base Router Station

A freestanding router cabinet with two storage drawers, an open router bay and a hinged edged tabletop.

Advanced6 stages12-page source
AI finished-project concept for Drawer Base Router Station
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Planning overview, not a shop-tested or construction-ready plan. Planning only: mounting and fence details refer to separate missing articles. Do not reproduce the instruction to lift a workpiece off a running table-saw blade.
Understand the project

What makes this build.

Cabinet joinery is combined with a motorized-tool support system.

Cabinet joinery is combined with a motorized-tool support system.

The open upper bay gives access to the router.

Two unequal-height drawers store accessories below.

Points to resolve before building

  • Planning only: mounting and fence details refer to separate missing articles.
  • Do not reproduce the instruction to lift a workpiece off a running table-saw blade.
  • Historical caster tricks do not establish a safe stationary base.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Drill and dowel jig
  • Clamps
  • Chisels

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Frame posts¾ × 2 × 36¼ inchesSource p. 1
Drawer front heights5 inches and 10 inches in sourceSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 6

Resolve the tabletop and machine details

Source pp. 2, 10, 11

  1. Correct the corrupted tabletop dimension from the actual drawing and choose a compatible router mounting system. Supply guarding, dust control and a suitable disconnect missing from the captured guide.
Before moving onA complete reviewed machine layout exists.
Stage 2 of 6

Build the side frames

Source pp. 3, 4, 5

  1. Drill matching dowel joints and route supported panel grooves, keeping the lower enclosed area distinct from the open router bay. Fit the side panels and glue the frames square.
Before moving onBoth sides are identical and remain flat.
Stage 3 of 6

Make drawer support frames

Source pp. 6, 7

  1. Fit the runner tenons, frame grooves and center drawer guides. Dry-fit them between the side frames before gluing the cabinet.
Before moving onRunners align and the cabinet is square.
Stage 4 of 6

Fit the two drawers

Source pp. 8, 9, 10

  1. Choose dovetails or the illustrated locking joints and adjust part lengths for that choice. Leave suitable movement clearance and check the underside guide fit.
Before moving onBoth drawers travel freely without tipping.
Stage 5 of 6

Fit the hinged top

Source p. 11

  1. Edge the top and provide solid backing for hardware rather than relying on repeated screw engagement in particleboard. Fit safe supports and retention for the lifted top.
Before moving onTop closes flat and remains supported during router access.
Stage 6 of 6

Stabilize and review

Source pp. 10, 11

  1. Use a positive immobilization system for any casters instead of loose wedges or crossed wheels. Have the whole unpowered station reviewed before commissioning.
Before moving onThe station cannot roll, tip or fold under normal feed forces.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Standing Router Table.pdf
Source length
12 pages
Attribution
Jeff Greef Woodworking, Floor Standing Router Table, archived 2003.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.