Breadboard movement and pegged joinery require careful furniture layout.
Project library / Tables & desks
Breadboard Tavern Table
A simple rectangular tavern table with a thick breadboard-end top and pegged mortise-and-tenon base.

What makes this build.
Breadboard movement and pegged joinery require careful furniture layout.
The materials schedule pairs a poplar base with a chestnut top.
A small bead details the apron edge.
Points to resolve before building
- Planning guide: the source is one sheet and needs a fully resolved breadboard fastening detail.
Materials & tools.
Check what you have, then confirm stock sizes and hardware against your chosen dimensions.
Materials checklist
Tools & operations
- Saw
- Router or mortising tools
- Drill
- Clamps
- Plane
Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.
Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.
Measurements to know.
Selected dimensions verified from the source. This is not an automatically scaled cutting list.
| Top center | 1⅛ × 36 × 43 inches | Source p. 1 |
|---|---|---|
| Breadboard ends | Two at 1⅛ × 2½ × 36 inches | Source p. 1 |
| Legs | Four at 2⅛ inches square × 28¼ inches | Source p. 1 |
Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.
Inches to millimeters
Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.
Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.
Explore the construction.
Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.
Develop the movement details
- Read the breadboard and apron joint details together and plan the top’s seasonal movement. Supply an explicit slotted fastening arrangement where the drawing alone is unclear.
Prepare the base
- Mill straight leg blanks and matching aprons. Lay out the mortises and tenons from common reference faces before cutting.
Fit and peg the joints
- Dry-fit the base and check it for square and twist. Drill and fit the pegs only after the joints seat correctly.
Make the broad top
- Glue and flatten the chestnut panel, then fit the breadboard ends using the reviewed movement detail. Keep the top flat while fitting recessed screws and plugs.
Attach and finish
- Center the top on the base with suitable tabletop fasteners. Ease edges and apply the chosen finish, checking the table for stability before use.
Progress and notes stay in this browser. Nothing is uploaded.
Source notes.
- Original PDF
- Tavern Table.pdf
- Source length
- 1 pages
- Attribution
- Archived woodworking-plan collection; original author not established from this source.
- This edition
- 116 Studio · Original written companion and AI concept image · November 2026
Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.
Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.