Project library / Storage & cabinets

Storage & cabinets / Design study

Swivel Top Media Cart

A small walnut-veneer media cart with an open shelf, a rotating top tray and plate casters.

Intermediate5 stages6-page source
AI finished-project concept for Swivel Top Media Cart
AI concept visualization · Use the source dimensions and fitted parts for construction.
Design review required. Planning overview, not a shop-tested or construction-ready plan. Planning only until display weight, swivel stability and caster loads are reviewed. The historical dimensions and hardware do not establish suitability for a modern large display.
Understand the project

What makes this build.

A mobile cabinet with a swivel load needs a stability review.

A mobile cabinet with a swivel load needs a stability review.

The narrow rotating tray sits above a wider rectangular case.

An open equipment shelf retains a rear ventilation gap.

Points to resolve before building

  • Planning only until display weight, swivel stability and caster loads are reviewed.
  • The historical dimensions and hardware do not establish suitability for a modern large display.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Router
  • Drill
  • Clamps
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Top and bottom18 × 25 inchesSource p. 2
Tray12 × 18 inchesSource p. 2
Side panels18 × 23¼ inchesSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

Read, assess & plan

Explore the construction.

Review stages explain the historical design and unresolved decisions; they are not approval to build or use it.

Stage 1 of 5

Review equipment and stability

Source pp. 2, 3

  1. Measure the actual device footprint, weight and center of gravity. Select a rated bearing and caster system and check stability throughout the swivel range.
Before moving onThe intended device has a reviewed support and restraint arrangement.
Stage 2 of 5

Cut the case joinery

Source p. 2

  1. Cut matching plywood panels and fit the shelf dados and back rabbets. Preserve the intended rear cable/ventilation opening and verify it meets current equipment needs.
Before moving onThe dry case is square and ventilation remains unobstructed.
Stage 3 of 5

Assemble and edge the box

Source p. 3

  1. Glue and fasten the case, using the removable back to hold it square. Cover exposed plywood edges with matching veneer tape by the adhesive maker’s instructions.
Before moving onCase is rigid and edging adheres without bubbles.
Stage 4 of 5

Fit the swivel tray

Source pp. 3, 4

  1. Use the selected bearing’s installation pattern and fasteners rather than relying on obsolete part numbers. Check screw clearance and tray rotation with the unit unladen.
Before moving onThe bearing turns freely without loose or projecting screws.
Stage 5 of 5

Fit casters and finish

Source p. 4

  1. Install rated lockable casters to a suitable load-bearing base detail. Finish the cabinet and complete the stability check before placing equipment on the rotating tray.
Before moving onThe cart is immobilized for use and remains stable through rotation.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
TV VCR Cabinet.pdf
Source length
6 pages
Attribution
Archived Minwax TV/VCR Cabinet with Swivel Tray project.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.