Project library / Storage & cabinets

Storage & cabinets / Build companion

Dowel Grid Wine Rack

A small freestanding bottle rack assembled from rounded hardwood crosspieces joined by short dowels.

Intermediate5 stages2-page source
AI finished-project concept for Dowel Grid Wine Rack
AI concept visualization · Use the source dimensions and fitted parts for construction.
A companion to the original plan. Original reading guide based on the archived plan; not shop-tested. Confirm diagram dimensions against the private source before cutting.
Understand the project

What makes this build.

Many repeated shallow dowel sockets require accurate drilling.

Many repeated shallow dowel sockets require accurate drilling.

Rounded crosspieces form the bottle-support grid.

Six short dowel feet lift the rack slightly above the surface.

Points to resolve before building

  • No tested bottle capacity or load rating is provided.
  • The source’s optional-glue suggestion requires judgement; loose joints can release heavy glass bottles.
Prepare the workbench

Materials & tools.

Check what you have, then confirm stock sizes and hardware against your chosen dimensions.

Materials checklist

Tools & operations

  • Saw
  • Drill press or accurate drilling jig
  • Router or hand tools for rounding
  • Clamps
  • Sander

Tool choices may include practical editorial suggestions. Use workholding and guarding appropriate to the actual machine and operation.

Choose dry, sound stock and test unfamiliar joints in scrap. Keep guards, push aids, eye protection, and dust control appropriate to the work.

Keep the numbers close

Measurements to know.

Selected dimensions verified from the source. This is not an automatically scaled cutting list.

Source dimensions
Crosspiece length10½ inches after trimmingSource p. 1
Connecting dowelsThirty-two at 4½ inchesSource p. 2
FeetSix dowels at 2 inchesSource p. 2

Printed diagrams and concept images are not scale references. Verify measurements, material thickness, hardware fit, and allowances before cutting.

Inches to millimeters

Convert a measurement without changing the design. Enter a decimal or a fraction, such as 1 3/8.

34.925 mm

Nominal lumber names and actual finished sizes are different. Converting units does not choose a substitute stock size.

From stock to finished project

Let’s make it.

Read the complete sequence before cutting. Mark a stage complete after its fit checks and any required glue cure.

Stage 1 of 5

Check bottle sizes and layout

Source pp. 1, 2

  1. Compare the rack’s grid to the bottles intended for storage. Mark the three different crosspiece drilling patterns so the top, middle and bottom pieces cannot be confused. Check the neck and body contact separately; decorative bottles can differ enough from standard shapes to sit poorly in a fixed grid.
Before moving onEvery part is assigned a location in the exploded view.
Stage 2 of 5

Prepare the crosspieces

Source p. 1

  1. Trim all hardwood blocks to equal length and round their edges consistently. Maintain clear reference faces for drilling after shaping. Round matching edges before cutting tiny pieces if the chosen tool setup permits, and retain a flat reference for the socket jig.
Before moving onCrosspieces match and retain sufficient flat drilling surfaces.
Stage 3 of 5

Drill the sockets

Source p. 1

  1. Use a stop-controlled drill setup to produce the illustrated three-quarter-inch sockets. Test the specified shallow depth on scrap and confirm that intersecting holes do not break through. Mark a depth stop and verify the first drilled block by inserting a dowel, rather than judging the shallow blind hole by eye.
Before moving onEach dowel seats to a consistent depth.
Stage 4 of 5

Dry-assemble the grid

Source p. 2

  1. Cut the short dowels and feet, then assemble horizontal connections before stacking the levels. Check that bottle contact points line up and the rack stands evenly. Build one complete level first and compare its two diagonals before repeating it, so a drilling error is caught before the rack stacks up.
Before moving onThe grid is square and bottles have stable support.
Stage 5 of 5

Secure and finish

Source p. 2

  1. Choose an appropriate adhesive joint rather than relying on an unverified loose friction fit. Finish the rack, allow it to cure and load gradually while checking stability. Let adhesive and finish cure before loading glass bottles, then check for racking with the rack standing on its intended shelf or counter.
Before moving onNo dowel joint loosens and the rack remains steady.

Progress and notes stay in this browser. Nothing is uploaded.

Trace the details

Source notes.

Original PDF
Wine Rack.pdf
Source length
2 pages
Attribution
Wine Rack project submitted by William D. Leith.
This edition
116 Studio · Original written companion and AI concept image · November 2026

Page references count from the first page of this PDF. The original is retained in the owner’s private woodworking collection; it is not distributed by this website. Consult it for full drawings, templates, and details beyond this companion.

Historical plans can omit essential context. Source references identify where a detail came from; they do not certify the design or replace current manufacturer instructions or applicable professional review.